RIVA S FIRMWARE UPDATE INSTRUCTIONS
Windows 10 Free Upgrade
To install the update on your RIVA S, you will need a Windows PC, your RIVA S speaker and USB to micro USB cable.
Csr Bluesuite Windows 10
Oct 13, 2020 Windows › CSR BlueSuite › 2.5. CSR BlueSuite 2.5. Choose the most popular programs from Audio & Video software. 3.4 (27 votes) 2.6.6. Connect the CSR USB-SPI programmer and Tag-Connect line with a AudioB Plus convert board, then connect CSR USB-SPI to your computer by a mini USB cable and windows will auto detect it and install the drivers. Step2: Connect TC2050-IDC-NL’s connector to AudioB plus programming port. If you need an older version of the software (Windows Vista, XP, 32-bit, etc.), go to 4) Download latest version: as of 9/12/2017 it is BlueSuite 2.6.8 I will get this software installed and use PSTools to migrate the config data from old CSR8670 chip to new. This driver is tested with CSR BlueSuite 2.1 - 2.6.0 and with CSR BlueLab 4.1, but should work with other CSR software, such as SDK, ADK, Configuration Tool, Parameter Manager. Features include low power consumption, support for mesh networking, multiple radios and a software development kit (SDK) that integrates a host of Bluetooth profiles. Runs on: WinVista, WinVista x64, Win7 x32, Win7 x64, Windows Vista, Windows 10, Windows 8 QuickBuild v.5.0.14 a cross-platform build automation and management server QuickBuild is a cross-platform build automation and management server that unifies all levels of builds such as continuous integration, daily build, QA and release build.
Please follow these steps to update your RIVA S:
1. Download and run the installer located at http://bit.ly/RIVA_S_Installer.
2. Once the installer is running, follow the steps as prompted.
a. Leave all boxes checked during the installation process.
3. Now that the RIVA S Installer has been installed on your Windows PC, download the RIVA S Firmware located at http://bit.ly/sfirmware.
4. Navigate to your START button and find the CSR BlueSuite 2.5.0 folder. In this folder locate and launch the DFUWizard (it should have a blue and white icon).
5. Please follow these steps to update the firmware on your RIVA S:
a. Power on your RIVA S.
i. We recommend you connect it to the DC adapter/charger in case the
battery has a weak charge.
ii. Make sure it is not paired to any of your Bluetooth® devices. Press and hold the Input button (with the Bluetooth® icon) to unpair.
b. Press and hold the + & – buttons together until the battery indicator changes to alternating blue/violet color, approximately 10 seconds.
c. Using the micro USB cable, connect your RIVA S to your Windows PC in a USB
2.0 port.
i. The battery light indicator, located on the back of your RIVA S will change to a pulsing cyan/aqua color.
ii. You should also hear a beep or see an indication on your computer that it is connected to a USB device.
iii. After your PC has detected the speaker, as indicated above, click NEXT.
d. Make sure that Universal Serial Bus (USB) is selected and click NEXT.
* If your computer states that no speaker is found, leave the cable plugged into your computer and speaker, power the RIVA S speaker Off/On, unplug the cable from the RIVA S and continue from step “b” above.
** If that doesn’t resolve it, navigate to where you installed the Firmware Installer. This is likely going to be something like C:Program FilesCSRBlueSuite 2.6.2. Enter the folder called Drivers, then open Win64. Within this folder you should see something called DPInst.exe. Run this program and then start the firmware update process from the beginning of this document.
e. Select the top Option “Download a new version of the firmware, saving a copy of the current version first.” Click NEXT.
f. Click BROWSE and locate where you have downloaded the RIVA S Firmware file. Click on the file and click SELECT. Click NEXT.
g. Click NEXT again. Your firmware update will begin at this point.
h. When the update completes, click FINISH. DO NOT TURN OFF YOUR RIVA S SPEAKER AT THIS POINT.
i. The battery light indicator will show a rapidly flashing green light. After a few minutes, the battery light indicator will return to a slow pulse. Color will vary based on level of battery charge on your RIVA S.
i. Unplug the micro USB cable from your RIVA S and turn your speaker ON.
j. Please perform a factory reset at this point:
i. Reset the speaker by simultaneously pressing the +, BT, and Power buttons for approximately 10 seconds. You will hear a quick double beep sound. The speaker will turn OFF and back ON automatically.Your RIVA S Firmware update is now complete.
Csr Bluesuite Windows 10 64-bit
If you have any questions, please contact RIVA Audio Customer Support.